Maintenance Plumbing

Maintenance plumbing is about dealing with those everyday faults properly, checking why they are happening and making sure the repair makes sense for the rest of the system.

For a homeowner, that can mean fixing leaking taps, repairing toilets, checking water pressure, sorting out a slow drain, looking at a hot water problem or replacing a valve that is no longer doing its job.

For a business or facility manager, maintenance plumbing can involve a much wider range of work because there may be several bathrooms, staff areas, kitchens, hot water systems, drainage points and service areas across the property. The plumbing gets used differently depending on the building, so the maintenance needs to suit the site.

Some are easy to find because the water is visible around a fitting, valve or fixture. Others are less obvious and may show up as dampness, staining, higher water use or moisture where there should not be any. If the leak cannot be traced from the visible plumbing, further leak detection may be needed.

If a customer tells us the pressure has changed, we take that into account with the rest of the plumbing rather than looking at the fixture in isolation. In some cases, the pressure issue is straightforward. In others, it needs more checking before the cause is clear.

Hot water systems also make up a big part of maintenance plumbing services in Melbourne. A unit may still be producing hot water but have a valve that has started leaking, pipework that is deteriorating or another component that is showing signs of wear.

Not every slow drain needs a camera inspection or high-pressure jetting, but if the same problem keeps coming back, there is usually more value in finding the cause than repeatedly clearing the symptom.

Preventative plumbing maintenance is another part of what we do. The idea is not to replace things before they fail just for the sake of it. It is about keeping an eye on the parts of the plumbing that are heavily used, have caused trouble before or are starting to show signs of wear.

There is no single schedule that suits every property. A small office with a couple of bathrooms does not need the same maintenance plan as a school, factory or large commercial facility. We look at how the property is used, what plumbing is installed and what problems have occurred before deciding what type of maintenance makes sense.

When we find something outside the original maintenance scope, we explain it. Sometimes it is a small repair that can be discussed while we are there. Other times it may need more investigation, parts ordered or a separate quote because the work is larger than expected.